Funepoxy

The resin 1:1 mix ratio by volume,  1 Gallon kit is volume 1 Gallon mixed, is the total volume 1 Gallon kit :   64oz resin A + 64oz hardener B  (Total 1 Gallon)  Features: Mix Ratio……………1:1 by volume Work time …………..45-60 minutes Hardness………………..D70-80 after full cure  Mixed Viscosity……….2500-3500cps. Chemical Resistance…….excellent Moisture Resistance……..excellent FDA Compliant / Food grade: Yes, in its inert fully cured state Heat resistance: up to 80℃ (please don’t leave hot pans on it,a coaster needed) Approximate Coverage:  12 square ft per gallon at 1/8 inch thickness   Perfect for tabletops, fiberglass work, small castings (under 1.2″ /3CM), electrical potting, jewelry making, concrete – pebble coating, marine applications- boat buildingThe resin 1:1 mix ratio by volume, 2 Gallon kit is volume 2 Gallon mixed, is the total volume2 Gallon kit : 1 Gallon resin A + 1 Gallon hardener B (Total 2 Gallon) package contains : 2X 2 Gallon kit (4 Gallons Total)Note: Epoxy resin is not resistant to high temperatures and aging, only suitable for indoor use. Features:Mix Ratio……………1:1 by volumeWork time …………..45-60 minutesHardness………………..D70-80 after full cure Mixed Viscosity……….2500-3500cps.Chemical Resistance…….excellentMoisture Resistance……..excellentFDA Compliant / Food grade: Yes, in its inert fully cured stateHeat resistance: up to 80℃ (please don’t leave hot pans on it,a coaster needed)Approximate Coverage: 12 square ft per gallon at 1/8 inch thickness Perfect for tabletops, fiberglass work, small castings (under 1.2″ /3CM), electrical potting, jewelry making, concrete – pebble coating, marine applications- boat building, & wood water proofing – repairs. Tips for operationThis product is 1:1 fast cure resin, each time mixed, pour No more than 150ml total, (that is 75ml A + 75ml B, A must be ≥ B), with a thickness range of ≤1.2″ to avoid bursting.and you can go as deep as you like, just make sure to work in stages.stay under 1.2″ per pour.after the surface film cures begin your second pour.the surface set time is roughly 1 hour at room temp.the full cure time is 8-12 hours in summer and 12-24 hours in winterThe ideal working temperature is 21-29℃，if below 20℃, full curing time will be extended. Operation steps1:1 ratio for A&B glue by volume (A can be 2-5% more than B to make harder)Pour into the mixing cupAlong the cup wall and bottom stir it evenly for 1-2 minutesAdd glitter or pigmentand if you needSlowly pour mixed resindown the moldAdd other decorativeImportant This chemical needs to be stored in a dry, safe, temperature controlled environment. Always keep the lids tightly sealed when not in use. Remember, oxygen and moisture oxidize and can rapidly degrade the epoxy and hardener. Moisture is also a potential issue. Always keep the bottles sealed when not in use. When applying this product, use gloves, goggles, and proper safety equipment. Please refer to the safety data sheet before using any of our epoxy products. PaymentShipping detailsReturn policyAbout usContact usPaymentWe accept Paypal,Google Pay,VISA,Master Card,American Express and Discover.Shipping detailsWe usually ship from US within 1-3 business days with tracking number by USPS or UPS.Return policy30 days returns. Seller pays for return shipping.About usWe are a trustworthy and professional eBay seller.Contact usIf any problems about our product and service,contact us for free at any time via eBay messages.BrandFunepoxyColorClearHandmadeYesKit Capacity2 Gallon TotalKit Volume1 Gallon epoxy resin A + 1 Gallon hardener BA:B Ratio1:1 (volume ratio)

The resin 1:1 mix ratio by volume,  1 Gallon kit is volume 1 Gallon mixed, is the total volume 1 Gallon kit :   64oz resin A + 64oz hardener B  (Total 1 Gallon)  Features: Mix Ratio……………1:1 by volume Work time …………..45-60 minutes Hardness………………..D70-80 after full cure  Mixed Viscosity……….2500-3500cps. Chemical Resistance…….excellent Moisture Resistance……..excellent FDA Compliant / Food grade: Yes, in its inert fully cured state Heat resistance: up to 80℃ (please don’t leave hot pans on it,a coaster needed) Approximate Coverage:  12 square ft per gallon at 1/8 inch thickness   Perfect for tabletops, fiberglass work, small castings (under 1.2″ /3CM), electrical potting, jewelry making, concrete – pebble coating, marine applications- boat buildingThe resin 1:1 mix ratio by volume, 1 Gallon kit is volume 1 Gallon mixed, is the total volume1 Gallon kit : 64oz resin A + 64oz hardener B (Total 1 Gallon) package contains : 4X 1 Gallon kit Features:Mix Ratio……………1:1 by volumeWork time …………..45-60 minutesHardness………………..D70-80 after full cure Mixed Viscosity……….2500-3500cps.Chemical Resistance…….excellentMoisture Resistance……..excellentFDA Compliant / Food grade: Yes, in its inert fully cured stateHeat resistance: up to 80℃ (please don’t leave hot pans on it,a coaster needed)Approximate Coverage: 12 square ft per gallon at 1/8 inch thickness Perfect for tabletops, fiberglass work, small castings (under 1.2″ /3CM), electrical potting, jewelry making, concrete – pebble coating, marine applications- boat building, & wood water proofing – repairs. Tips for operationThis product is 1:1 fast cure resin, each time mixed, pour No more than 150ml total, (that is 75ml A + 75ml B, A must be ≥ B), with a thickness range of ≤1.2″ to avoid bursting.and you can go as deep as you like, just make sure to work in stages.stay under 1.2″ per pour.after the surface film cures begin your second pour.the surface set time is roughly 1 hour at room temp.the full cure time is 8-12 hours in summer and 12-24 hours in winter Operation steps1:1 ratio for A&B glue by volume (A can be 2-5% more than B to make harder)Pour into the mixing cupAlong the cup wall and bottom stir it evenly for 1-2 minutesAdd glitter or pigmentand if you needSlowly pour mixed resindown the moldAdd other decorativeImportant This chemical needs to be stored in a dry, safe, temperature controlled environment. Always keep the lids tightly sealed when not in use. Remember, oxygen and moisture oxidize and can rapidly degrade the epoxy and hardener. Moisture is also a potential issue. Always keep the bottles sealed when not in use. When applying this product, use gloves, goggles, and proper safety equipment. Please refer to the safety data sheet before using any of our epoxy products. PaymentShipping detailsReturn policyAbout usContact usPaymentWe accept Paypal,Google Pay,VISA,Master Card,American Express and Discover.Shipping detailsWe usually ship from US within 1-3 business days with tracking number by USPS or UPS.Return policy30 days returns. Seller pays for return shipping.About usWe are a trustworthy and professional eBay seller.Contact usIf any problems about our product and service,contact us for free at any time via eBay messages.BrandFunepoxyColorClearHandmadeYesKit Capacity1 Gallon TotalKit Volume64oz epoxy resin A + 64oz hardener BA:B Ratio1:1 (volume ratio)