1 Gallon

Note: the volume kit is the volume mixed , is the total volume The resin 1:1 mix ratio by volume, can deep pour up to 1.2″ one time in winter 16 Oz kit :    8 Oz resin  +  8 Oz hardener      (Total 16 Oz )   32 Oz kit :   16 Oz resin  + 16 Oz hardener     (Total 32 Oz )   64 Oz kit :   32 Oz resin  + 32 Oz hardener       (Total 64 Oz )   1 Gallon kit :   64 Oz resin  + 64 Oz hardener    (Total 1 Gallon)  2 Gallons kit :   1 Gallon  resin  + 1 Gallon  hardener    (Total 2 Gallons)  The resin specially designed with Low viscosity, convenient 1:1 mix ratio by volume, long pot life, room temperature curing system with great clarity and a high gloss finish. Each time the resin mixed, pour No more than 150ml, with a thickness range of 0.4″ -1.2″ (1-3cm), to avoid bursting.Food Safe 1:1 Clear Epoxy ResinNote: the volume kit is the volume mixed , is the total volumeThis product cures to a brilliant high gloss finish at ambient and low temperatures without accelerators and allows for quick return to service. The finished product will be very rigid, smooth, clear, and display a brilliant high gloss finish similar to glass. The resin 1:1 mix ratio by volume, can deep pour up to 1.2″ one time 16 Oz kit : 8 Oz resin + 8 Oz hardener (Total 16 Oz ) 32 Oz kit : 16 Oz resin + 16 Oz hardener (Total 32 Oz ) 64 Oz kit : 32 Oz resin + 32 Oz hardener (Total 64 Oz ) 1 Gallon kit : 64 Oz resin + 64 Oz hardener (Total 1 Gallon) 2 Gallons kit : 1 Gallon resin + 1 Gallon hardener (Total 2 Gallons) Tips for operationThis product is 1:1 fast cure resin, each time mixed, pour No more than 150ml total, (that is 75ml A + 75ml B, A must be ≥ B), with a thickness range of ≤1.2″ to avoid bursting.you can go as deep as you like, just make sure to work in stages.Stay under 1.2″ per pour.After the surface film cures begin your second pour. the surface set time is roughly 1 hour at room temp.the full cure time is 8-12 hours in summer and 12-24 hours in winterthe hardness range is 70-80D after full curePerfect for tabletops, fiberglass work, small castings (under 1.2″ /3CM), electrical potting, jewelry making, concrete – pebble coating, marine applications- boat building, & wood water proofing – repairs. Features:Mix Ratio……………1:1 by volumeWork time …………..30-45 minutesHardness………………..D70-80Mixed Viscosity……….2500-3500cps.Chemical Resistance…….excellentMoisture Resistance……..excellentFDA Compliant / Food grade: Yes, in its inert fully cured stateHeat resistance: up to 80℃ (please don’t leave hot pans on it,a coaster needed)Approximate Coverage: 12 square ft per gallon at 1/8 inch thicknessImportant This chemical needs to be stored in a dry, safe, temperature controlled environment. Always keep the lids tightly sealed when not in use. Remember, oxygen and moisture oxidize and can rapidly degrade the epoxy and hardener. Moisture is also a potential issue. Always keep the bottles sealed when not in use. When applying this product, use gloves, goggles, and proper safety equipment. Please refer to the safety data sheet before using any of our epoxy products. PaymentShipping detailsReturn policyAbout usContact usPaymentWe accept Paypal,Google Pay,VISA,Master Card,American Express and Discover.Shipping detailsWe usually ship from US within 1-3 business days with tracking number by USPS or UPS.Return policy30 days returns. Seller pays for return shipping.About usWe are a trustworthy and professional eBay seller.Contact usIf any problems about our product and service,contact us for free at any time via eBay messages.BrandLOVFENColorClearHandmadeYes